C
Commercialpedia Indian Railways commercial circulars and policies

systems in on-board Kavach include

· 2025-05-18
Currency not verifiedExam paperticket-checking
Currency not verified. Nobody has confirmed whether this circular is still in force. Check the present position before relying on it. The official Railway Board PDF always prevails over anything shown here.

No official Railway Board PDF has been traced for this entry yet. The text below was read from the document held in the library.

Date2025-05-18
TypeCommercial Circular
Topicticket-checking
CurrencyCurrency not verified

Summary

systems in on-board Kavach include _____________ Automatic signal shall not assume OFF aspect unless the line is clear upto a distance of ______ mtrs beyond the next stop signal in advance if the signal happens to be a

Text of the circular

QUESTION PAPER
Promotion to Gr.B posts against 70% Quota-(ASTE) [SHIFT - 1]
Exam Date : 18/05/2025
Time : 03:00 PM - 05:00 PM
Part A
Question 1
Question Id : 991
RTUs are used in ____________.
आर.टी.यू. का प्रयोग _______ में किया जाता है।
Answer :
Option Id
(A) 
991001
(B) 
991002
(C) 
991003
(D) 
991004
Right Answer :
All the options
सभी विकल्प
Right Option Id : 991004
Question 2
Question Id : 992
Maximum number of dataloggers that the CMU can retrieve data from is _________.
सीएमयू द्वाारा डेटा प्राप्त करने वाले डेटालॉगर्स की अधिकतम संख्या ______ है।
Answer :
Option Id
(A) 
992001
(B) 
992002
(C) 
992003
(D) 
992004
Right Answer :
32
Right Option Id : 992003
Question 3
Question Id : 993
The earth resistance of the earth connected to the EI shall be less than _________.
ईआई से जुड़ेे एर्थ का एर्थ प्रतिरोध ______ कम से कम होगा
Answer :
Option Id
(A) 
993001
(B) 
993002
(C) 
993003
(D) 
993004
Right Answer :
1 ohms
1 ओम
Right Option Id : 993001
Question 4
Question Id : 994
The minimum insulation resistance of a signalling cable shall be _________.
सिगनलिंंग केबल का न्यूनतम इन्सुलेशन प्रतिरोध ______________होगा।
Level crossing gates
लेवल क्रॉसिंंग गेट
IBS
आई बी एस
Auto huts
ऑटो हट्स
All the options
सभी विकल्प
64
30
32
128
1 ohms
1 ओम
10 ohms
10 ओम
0.1 ohm
0.1 ओम
.01 ohm
.01 ओम

Answer :
Option Id
(A) 
994001
(B) 
994002
(C) 
994003
(D) 
994004
Right Answer :
5 mega ohms/km
5 मेगा ओम/किमी
Right Option Id : 994001
Question 5
Question Id : 995
Concrete sleepers that are used in track circuited areas shall have a minimum resistance between insert to insert of_____________.
ट्रैैक सर्किट वाले क्षेत्रों में प्रयोग किए जाने वाले कंक्रीट स्लीीपरों में इन्सर्ट से इन्सर्ट के बीच न्यूनतम प्रतिरोध ______ होना चाहिए।
Answer :
Option Id
(A) 
995001
(B) 
995002
(C) 
995003
(D) 
995004
Right Answer :
500 ohms
500 ओम
Right Option Id : 995002
Question 6
Question Id : 996
Iron screening shall be provided in the event of any metallic part falling within _____ meters of the 25 KV live conductor.
25 केवी लाइव कंडक्टर के _____ मीटर के भीतर किसी भी धातु भाग के आने की स्थिति में आयरन स्क्रीीनिंंग उपलब्ध की जाएगी।
Answer :
Option Id
(A) 
996001
(B) 
996002
(C) 
996003
(D) 
996004
Right Answer :
2 mtrs
2 मीटर
Right Option Id : 996001
Question 7
Question Id : 997
The current rating of a battery charger is 35 amps and the load current at the station is 15 amps, the maximum AH capacity of the battery bank to be used is________.
एक बैटरी चार्जर की करंट रेटिंंग 35 एम्पि
यर है तथा स्टेशन पर लोड करंट 15 एम्पि
यर है, उपयोग की जाने वाली बैटरी बैंक की अधिकतम एएच क्षमता ______ है।
Answer :
Option Id
(A) 
997001
(B) 
997002
(C) 
997003
(D) 
997004
5 mega ohms/km
5 मेगा ओम/किमी
10 mega ohms/km
10 मेगा ओम/किमी
100 mega ohms/km
100 मेगा ओम/किमी
1 mega ohm/km
1 मेगा ओम/किमी
10 mega ohms
10 मेगा ओम
500 ohms
500 ओम
100 ohms
100 ओम
1 mega ohm
1 मेगा ओम
2 mtrs
2 मीटर
4 mtrs
4 मीटर
2.5 mtrs
2.5 मीटर
5 mtrs
5 मीटर
200 AH
200 एएच
120 AH
120 एएच
80 AH
80 एएच
300 AH
300 एएच

Right Answer :
200 AH
200 एएच
Right Option Id : 997001
Question 8
Question Id : 998
The maximum permitted length of direct feed of signals in double line sections shall be ______________.
दोहरी लाइन सेक्शन में सिगनलों के डैरेक्ट फीड की अधिकतम स्वीकृत लंबाई ______ होगी।
Answer :
Option Id
(A) 
998001
(B) 
998002
(C) 
998003
(D) 
998004
Right Answer :
220 mtrs
220 मीटर
Right Option Id : 998002
Question 9
Question Id : 999
The S&T work that shall be completed before issue of certificate for 2.2 KV anti theft charging __________.
2.2 केवी एंटी थेफ्ट चार्जिंग के लिए प्रमाण पत्र जारी करने से पहले पूरा किया जाने वाला एस एंड टी कार्य _____होगा।
Answer :
Option Id
(A) 
999001
(B) 
999002
(C) 
999003
(D) 
999004
Right Answer :
All the options
सभी विकल्प
Right Option Id : 999004
Question 10
Question Id : 1000
The minimum excitation voltage of DC track relays of 125% of pick up voltage shall be under ____ ballast resistance condition with normal working voltage.
125% पिक अप वोल्टेज के डीसी ट्रैैक रिले का न्यूनतम एक्साइटे

Extract shown above; the full text is available in the search app.

Related circulars

Search the whole library

Open this circular in the search app · Search all 4,025 documents